Lifting Inspection
The UAE’s construction, logistics, and industrial sectors are governed by some of the most stringent safety regulations in the Middle East. Whether you are operating out of Jebel Ali, a workshop in Sharjah, or a high-rise in Abu Dhabi, lifting equipment is subject to wear, environmental corrosion, and regulatory oversight.
A third party inspection removes bias from the safety process. It provides an independent verification that your equipment is safe for service. At CIB Mars, we act as that independent partner. However, before you pick up the phone, it is essential to understand the technical scope involved in different types of lifts.
Below is a technical breakdown of the Scope of 10 different lifting inspections in UAE. Use this as a checklist for your internal safet
01 Chain Block Inspection (Manual Hoists)
Chain blocks are often overlooked until a heavy load needs precise positioning. However, they fall under strict lifting tackle inspection and lifting gear inspection protocols.
Technical Scope: Inspectors measure the permanent stretch of load chain links (wear exceeding 5% is a failure). Hooks are inspected for a throat opening exceeding 5% of the original dimension. The braking mechanism is tested for slip under load.
Standards: ASME B30.21.
- Mobile Crane Inspection (Truck Mounted & Crawlers)
Hydraulic and lattice boom cranes face dynamic stresses. An annual inspection is a legal requirement, but a “10-year major” is a critical engineering necessity.
Technical Scope:
Routine: Wire rope lubrication, hook latch function, anti-two-block systems.
Major (10-Year): Mobile crane 10 year major inspection requires non-destructive testing (NDT) of the boom pivot points and turntable bearing bolts. For Franna cranes, the franna crane 10 year inspection focuses on structural chassis cracks.
Regulatory Requirements: Compliance with osha mobile crane inspection requirements (specifically 1910.179 and 1926.1412) is mandatory. A mobile crane lifting plan must align with the inspection findings.
Execution: We provide mobile crane third party inspection and crawler crane inspection services to certify mobile crane testing results.
02 Mobile Crane Inspection (Truck Mounted & Crawlers)
Hydraulic and lattice boom cranes face dynamic stresses. An annual lifting inspection is a legal requirement, but a “10-year major” is a critical engineering necessity.
Technical Scope:
Routine: Wire rope lubrication, hook latch function, anti-two-block systems.
Major (10-Year): Mobile crane 10 year major inspection requires non-destructive testing (NDT) of the boom pivot points and turntable bearing bolts. For Franna cranes, the franna crane 10 year inspection focuses on structural chassis cracks.
Regulatory Requirements: Compliance with osha mobile crane inspection requirements (specifically 1910.179 and 1926.1412) is mandatory. A mobile crane lifting plan must align with the inspection findings.
Execution: We provide mobile crane third party inspection and crawler crane inspection services to certify mobile crane testing results.
03 EOT Crane (Overhead Crane) Inspection
Electric Overhead Traveling (EOT) cranes operating in factories require a combination of daily visual checks and annual load tests.
Technical Scope:
Structural: The deflection test of eot crane measures the bridge girder sag under 125% of rated load. Deflection should not exceed L/1000 (span/1000).
Mechanical: Hoist brake slippage and rail wheel flange wear.
Documentation: We issue a eot crane test certificate after verifying your eot crane electrical maintenance checklist and eot crane daily checklist. The eot crane load test procedure involves lifting test weights to 125% capacity.
Standards: CMAA 70 & ASME B30.2.
04 Construction Hoist & Window Cradle (BMU)
ransporting personnel requires a different standard than transporting materials. Building Maintenance Units (BMUs) are often neglected until facade access is needed.
Technical Scope (Hoist): Rack and pinion gear backlash measurement, emergency lowering system function, and upper/lower limit switch activation.
Technical Scope (Cradle): For window cradle inspection dubai, inspectors check wire rope corrosion (6×19 class ropes), outrigger beam insertion depth, and tie-back restraint compliance.
Testing: We perform lifting inspection for construction hoist testing (drop test) and window cradle testing to ensure the overspeed governor engages before free fall exceeds 1 meter.
05 Elevator Inspection (Passenger & Freight)
Beyond the button panel, elevators are complex lifting systems governed by local municipality codes in Dubai and Abu Dhabi.
Technical Scope:
Brake Test: Measurement of stopping distance under full load (elevator brake test).
Load Test: Elevator static load test (200% load for 5 minutes) and elevator drop test (safety gear engagement).
Vendor Agnostic: We provide lifting inspection services to all brands, including otis elevator abu dhabi, kone elevators abu dhabi, ag melco abu dhabi, and thyssenkrupp elevator abu dhabi.
Urgency: If your elevator inspection expired, CIB Mars provides immediate lift inspection services and third party inspection for elevators to bring you back into compliance with UAE codes.
06 Escalator Inspection
Public safety in malls and airports relies on escalator integrity.
Technical Scope: Measurement of step gap (not to exceed 7mm), skirt brush deflection, handrail speed (must remain within 2% of step speed), and comb plate impact switch activation.
Local Context: Many escalator inspection dubai protocols require the “missing step test” to verify the drive chain safety switch.
Service Area: We cover escalator abudhabi for major hospitality and retail clients.
07 Tower Crane Inspection
The most critical asset on a high-rise site. Tower cranes are modular, meaning bolt torque is life-critical.
Technical Scope: Ultrasonic testing of mast bolts, visual lifting inspection of slewing unit rail hardness, anchor bolt tension at the foundation, and jib deflection under load.
Certification: We perform tower crane third party inspection to validate the tower crane testing results. We check the moment limiter calibration to ensure the crane does not exceed 90% of its tipping moment.
Locations: Tower crane inspection dubai and tower crane inspection abu dhabi are conducted with specific attention to wind load effects on structural stability.
08 Mobile Elevating Working Platform (MEWP)
Scissor lifts and boom lifts require daily “familiarization” checks and thorough annual inspections.
Technical Scope: Pothole protection mechanism deployment (for scissor lifts), platform slew bearing backlash, and structural cracks in the lift cylinder attachment points.
Safety Documentation: We verify ipaf harness use and inspection standards alongside the mewp pre use inspection checklist.
Compliance: Our mewp inspection requirements adhere to ansi mewp and osha mobile work platform standards. We provide mewp inspection abu dhabi and mewp inspection dubai with full load chart verification.
09 Forklift Inspection
Counterbalance forklifts (diesel/electric) are the most common cause of lifting-related near misses in warehouses.
Technical Scope:
Mast & Chains: Chain wear must not exceed 5% of original pin diameter. Mast tilt cylinder holding ability (no drift over 10 minutes).
Operational: Verification of forklift pre use inspection logs and installation of forklift inspection tags.
Standards: OSHA 1910.178 and ANSI/ITSDF B56.1.
Local Search: We provide forklift inspection in dubai and forklift testing for fork truck inspection and pre operational check forklift compliance.
10 Vehicle Lift (Automotive Hoist)
Workshop safety is often overlooked regarding hydraulic vehicle lifts.
Technical Scope: Cable equalization (stretch check), mechanical primary lock engagement height, and hydraulic cylinder seepage (loss of 1-inch in 10 minutes is failure).
Standards: Ansi ali aloim 2008 standard for automotive lifts is the benchmark. We test for vehicle lift inspection requirements as per OSHA.
Service Area: If you need a car lift inspection near me or vehicle lift inspection dubai, we cover auto lift inspection and vehicle hoist inspection requirements thoroughly.
New vs. In-Service Inspection: A Critical Distinction
It is vital to differentiate between new and in-service inspection.
New Inspection: Conducted before first use. Verifies that the equipment matches the load chart, manufacturer specifications, and local code compliance.
In-Service Inspection: Periodic (Monthly, Quarterly, Annual). Focuses on wear, corrosion, fatigue, and damage incurred during operation.
CIB Mars provides both categories. Even a brand new crane requires a third-party verification before lifting the first load.
Comprehensive Safety Ecosystem
While lifting equipment is our core focus, site safety is holistic. CIB Mars also offers auxiliary services to ensure your facility has no blind spots:
Environmental: Mold inspection and asbestos testing near me for older buildings.
Structural: Foundation inspection near me, structural engineer foundation inspection, and structural engineer inspection for crane runways.
Asset Integrity: Water damage inspection, pre purchase building inspection, furnace inspection, and licensed foundation inspector near me services.
Conclusion & How to Engage CIB Mars
Understanding the scope of these 10 inspections is the first step toward compliance. The second step is executing them with precision.
CIB Mars operates out of Dubai and Abu Dhabi, serving the entire UAE including Sharjah, Ajman, and Ras Al Khaimah. We offer LOLER inspection style documentation and inspection service for all the categories above.
If you require a lifting equipment inspection, mobile crane third party inspection, or need to locate an inspection company for inspection sharjah or inspection dubai, contact our technical team.
Email: info@cibmars.ae